• Free next day delivery
  • Simple returns policy
  • Expert advice
  • Wholesale prices direct
  • Safe & Secure

Call Mica Lighting 1300 GO MICA (1300 466 422)

Custom Made Acrylic Diffusers @ MICALighting.com.au

Welcome to Micalighting.com.au!

Acrylic Lighting Diffusers :: Custom Made.
Any Shape (Round, Square or Rectangle). Any Size (Flat Sheets Only - Not Moulded).

Mica Lighting is renown for its excellence in being able to offer consumers an array of lighting solutions.  Customers now have access to an innovative service of refurbishing and/or replacing their existing lighting diffusers.  We will custom make to suit your individual needs, and have the ability to offer the following solutions:

  • A range of prismatic diffusers, including K12, Y15 and Y19.
  • A range of non-prismatic diffusers, including clear, opal, reeded and egg-crate.
  • In addition, all of the above profiles can be:
    • Cut to any size and shape.
    • Can be laser-cut into any shape including circular and letter cut-outs.

 

Refurbishing your diffused light fittings is an inexpensive, cost-saving option.  We have an extensive range of products that can help to rejuvenate your existing lighting.  Simply contact us and we will advise you of possible solutions to suit your individual requirements.

Lighting technology has changed remarkably over the years.  So rather than replacing whole light fitting, Mica Lighting can provide consumers with a range of products to fit those obsolete ones.  We have a range of troffers, bulkheads, low bays, high bays and battens to suit.


K12 PRISMATIC PANEL DIFFUSER (also known as Y12 & D12)

The K12 Prismatic Panel Diffuser is typically used for:MICA Lighting K12 Acrylic Diffuser

  • Offices.
  • Schools.
  • Clinics.
  • Retail areas.

It is a standard and economical diffuser that is used as a benchmark for other prismatic panels in terms of overall efficiency and lamp concealment qualities.  The K12 offers maximum efficiency and good brightness control in direct glare.

Characteristics of the K12 Acrylic Diffuser are:

  • The raw sheet size is - 2440mm x 1220mm.
  • It has a 5mm diagonal female prism pattern.
  • Thickness is ~2.5mm.
  • To avoid possible sagging, the maximum spanning area recommended is 1200mm x 600mm (when supported on all 4 sides).
  • When Only supported on 2 sides, then one of these measurements must be halved.  If the length decreases, then it is possible for the width to increase.
  • It is made of acrylic material that complies with recognised standards.
  • The lenses of the panel have a standard life of 20 years.
  • Based on photometric tests, the light output ratio of the K12 prismatic panel diffuser is 74% and has a typical unified glare rating of 22.

 

K15 PRISMATIC PANEL DIFFUSER (also known as Y15 & D15)

The K15 Prismatic Panel is typically used for:MICA Lighting K15 Acrylic Diffuser

  • Retail areas.
  • The general office.
  • Illuminated ceilings.
  • Sky light domes.
  • Natural lighting.

The K15 acrylic diffuser is the next step up from the K12 acrylic diffuser.  It is used in many architectural applications, given the aesthetically pleasing appearance.

The characteristics of the K15 Prismatic Panel Diffuser are:

  • The raw sheet size is - 2440mm x 1220mm.
  • It has a flat appearance, yet spans extra wide luminaries.
  • It comprises of large 9.5mm square based female prisms.
  • Thickness is 4mm.
  • The Prisms run parallel and perpendicular to the length and width of the diffuser panel.
  • To avoid possible sagging, the maximum spanning area recommended is 1200mm x 900mm (when supported on all 4 sides).
  • When Only supported on 2 sides, then one of these measurements must be halved. If the length decreases, then it is possible for the width to increase.
  • The K15 is made of an acrylic material that complies with recognised standards.
  • The lenses of the prismatic diffuser panel have a standard life of 20 years under normal interior conditions.
  • Based on photometric tests, the light output ratio of the K15 prismatic panel diffuser is 82% and has a typical unified glare rating of 18.

 

K19 PRISMATIC PANEL (also known as Y19 & D19)

The K19 Prismatic Panel is typically used for:MICA Lighting K19 Acrylic Diffuser

  • Supermarkets.
  • Computer rooms.
  • Schools & Universities.
  • Hospitals.
  • Laboratories.
  • Testing & Inspection areas.
  • Offices & radio frequency sensitive areas.

The K19 acrylic diffuser, is the highest grade of acrylic diffuser, but is designed to be used in application specific environments.  Given their high degree of luminance control they are very well suited to areas involving onerous visual tasks.

The K19 prismatic panel diffuser has the following characteristics:

  • The raw sheet size is - 1220mm x 610mm.
  • Comprises of 4.7mm male prisms.
  • Thickness is 4mm.
  • These prisms run parallel and perpendicular to the length and width of the diffuser panel.
  • To avoid possible sagging, the maximum spanning area recommended is 1200mm x 600mm (when supported on all 4 sides).
  • When Only supported on 2 sides, then one of these measurements must be halved. If the length decreases, then it is possible for the width to increase.
  • The K19 is made of an acrylic material that complies with recognised standards.
  • The K19 has a standard life of 20 years.
  • Based on photometric tests, the light output ratio of the K19 prismatic diffuser panel is 66% and has a typical unified glare rating of 17.

As a special order, the K19 is also available in Silver Tint, which aids in U.V Absorbing and Radio Frequency Reducing.  The Silver Tint produces lower brightness and thus creating an elegant lighting effect.

 

 

Y5 REEDED DIFFUSER:

The Y5 Reeded Acrylic Diffuser is typically used for:MICA Lighting Y5 Reeded Acrylic Diffuser

  • Nail and Beauty Salons.
  • Boutique Fashion Stores.
  • Clinics.

The Y5 Reeded panel diffuser is an upmarket and aesthetically appealing acrylic diffuser.  The Y5 Reeded offers high efficiency and good brightness control in direct glare.

The Y5 reeded panel diffuser has the following characteristics:

  • The raw sheet size is - 1190mm x 290mm.
  • The Y5 is made of an acrylic material that complies with recognised standards.
  • The Y5 has a standard life of 20 years.

 

 

 

 

 

 

EL1 HONEYCOMB DIFFUSER (also known as Egg Crate)

The EL1 Honeycomb Acrylic Diffuser, is typically used for:

MICA Lighting Egg Crate Honeycomb Acrylic Diffuser

  • Reptile enclosures.
  • Storerooms.
  • Aquariums for separating fish during breeding.
  • Air conditioning return air grills.

It is an acquired diffuser that serves a specific purpose.

The EL1 honeycomb panel diffuser has the following characteristics:

  • The raw sheet size is - 1200mm x 600mm.
  • Opal white in colour.
  • Hole size - 15mm square.
  • Thickness - 8mm.

 

 

 

 

 

 

Thanking you in advance, for the opportunity to quote your lighting requirements.

Happy Online Shopping

The Team @ MICA Lighting.