FREE SHIPPING PROMOTION* - Australia wide - Simply spend $99 - Limited time
Toggle Nav 
Search
- Showroom : 8/4 Metrolink Cct, Campbellfield VIC 3061, Australia
- Location Map
Actec Pluto 15w 12v/24v Electronic LED Driver - Constant Voltage
$25.00 Don't Pay:: $35.95
SKU
ACC-SY-PLUTO-15DV
The Actec Pluto 15w 12v/24v Electronic LED Driver - Constant Voltage is a Dual Voltage (12v/24v) LED Driver. This options is controlled via an internal dip switch. is commonly used for LED downlights, LED strip lights, and many other LED applications, where constant voltage is required. This LED driver, converts 240v AC/DC power, into 12v/24v DC constant voltage power.
The Actec Pluto 15w 12v/24v Electronic LED Driver - Constant Voltage has the following specifications:
- Independant compact design.
- Easy press cable lock for primary terminals.
- Safe no-load operation.
- Overload & short circuit protection.
- Over temperature cut off.
- Protection class II.
- Primary Voltage: 220 - 240 Volts.
- Frequency: 50/60 Hz.
- Input Current: 0.15 A.
- Maximum Output: 15W.
- Output Voltage: 12v or 24v (Via an Internal Dip Switch).
- Output Current:
- 12v DC Mode: 0 - 1.25 A.
- 24v DC Mode: 0 - 0.625 A
- Power Factor: >0.80 λ.
- Ambient Temperature: 40 °C.
- Dimensions: 99mm x 39mm x 23mm.
- IP Rating: IP20
- ASA: Australian Standards Approved.
- Condition: Brand new in manufacturer's packaging.
BOX DIMENSIONS
width
10cm
height
4cm
length
2cm
BOX WEIGHT
0.06kg
This product is offered with a 1 year manufacturer's warranty.
All items warranty are covered by MICA Lighting, therefore should you have any trouble with your item, you only need to contact us. MICA Lighting, shall look after the warranty for you. Please use our "Contact Us" form and we shall attend to your requirements promptly.
*Please Note1: Warranties are deemed void:
- If not installed by a licenced electrician (DIY products exempt), and / or
- If the product has been modified or tampered with in any way.
*Please Note2: These Warranty Conditions should be read in conjunction with our Standard Terms and Conditions.
An LED Driver, is used to convert 240v AC/DC power, into a variety of outputs. Some of these outputs are 12v constant voltage, 24v constant voltage, 36v constant voltage, 350mA constant current, 500mA constant current, 700mA constant current, 1050mA constant current, just to name a few.nbsp; In order to select the correct LED Driver to suit your application, the type of LED light must be understood. For instance, when using a 24v high output LED strip, then a 24v DC LED driver with constant voltage is required. The output of almost all LED power supplies drops off quickly at temperatures above 50°C, therefore in these applications where the ambient temperature will exceed 50°C, the installation of extra power supplies will be required to compensate for this. In addition, there are LED drivers for internal and external use.
At MICA Lighting, we have an extensive range of transformers: Halogen Electronic, LED Drivers, Metal Halide Transformers, and Weatherproof Transformers.
We're sorry, an error has occurred while generating this content.
You Might Also Like
