Actec Pluto 200W 12V Electronic LED Driver - Constant Voltage Weatherproof IP66
$185.00 RRP $259.95
Estimate Fees

The Actec Pluto 200W 12V Electronic LED Driver - Constant Voltage Weatherproof IP66 is a constant voltage driver and is commonly used for outdoor LED lighting, as it is weatherproof IP66.  In addition, it can also be used for 12v LED garden lights, 12v LED downlights, 12v LED strip lights, and many other 12v LED applications, where constant voltage is required.  This LED driver, converts 240v AC/DC power, into 12v DC constant voltage power.

SKU
ACC-SY-LEDDRIVER-PLUTO-200W-12V
1-2 Business Days

The Actec Pluto 200W 12V Electronic LED Driver - Constant Voltage Weatherproof IP66 is a constant voltage driver and is commonly used for outdoor LED lighting, as it is weatherproof IP66.  In addition, it can also be used for 12v LED garden lights, 12v LED downlights, 12v LED strip lights, and many other 12v LED applications, where constant voltage is required.  This LED driver, converts 240v AC/DC power, into 12v DC constant voltage power.

The Actec Pluto 200W 12V Electronic LED Driver - Constant Voltage Weatherproof IP66 has the following product features:

  • Independant outdoor functional design.
  • Primary terminal is pre-wired with 240v 1.2m 2Pin Flex & Plug.
  • Secondary terminal is pre-wired with low voltage 2 core silicon cable.
  • Safe no-load operation.
  • Overload & short circuit protection.
  • Over temperature cut off.
  • Protection class I.
  • Primary Voltage: 240 Volts.
  • Frequency: 50/60 Hz.
  • Input Current: 1.3 A.
  • Maximum Output: 200W.
  • Output Voltage: 12 Volts - 1 Output.
  • Output Current: 0 - 16.67 A.
  • Power Factor: >0.95 λ.
  • Ambient Temperature: 40 °C.
  • Dimensions: 250mm x 70mm x 40mm.
  • IP Rating: IP66 Weatherproof.
  • ASA: Australian Standards Approved.
  • Condition: Brand new in manufacturer's packaging.
delivery information
delivery information

BOX DIMENSIONS

Width

width

33cm
Height

height

9cm
Length

length

8cm

BOX WEIGHT

Weight

1.3kg

This product is offered with a 1 year manufacturer's warranty.

All items warranty are covered by MICA Lighting, therefore should you have any trouble with your item, you only need to contact us.   MICA Lighting, shall look after the warranty for you.  Please use our "Contact Us" form and we shall attend to your requirements promptly.

*Please Note1: Warranties are deemed void: 

  • If not installed by a licenced electrician (DIY products exempt), and / or
  • If the product has been modified or tampered with in any way. 

*Please Note2: These Warranty Conditions should be read in conjunction with our Standard Terms and Conditions.

An LED Driver, is used to convert 240v AC/DC power, into a variety of outputs.  Some of these outputs are 12v constant voltage, 24v constant voltage, 36v constant voltage, 350mA constant current, 500mA constant current, 700mA constant current, 1050mA constant current, just to name a few.nbsp; In order to select the correct LED Driver to suit your application, the type of LED light must be understood. For instance, when using a 24v high output LED strip, then a 24v DC LED driver with constant voltage is required. The output of almost all LED power supplies drops off quickly at temperatures above 50°C, therefore in these applications where the ambient temperature will exceed 50°C, the installation of extra power supplies will be required to compensate for this.  In addition, there are LED drivers for internal and external use.

At MICA Lighting, we have an extensive range of transformers:  Halogen Electronic, LED Drivers, Metal Halide Transformers, and Weatherproof Transformers.

Product Details

Customer Details