Skyline 90w LED Solar Sensor Street Light - Silver

*Please Note - This model will only work at night, as the inbuilt dusk till dawn sensor does not have an override - Perfect for outdoor areas.

The Skyline 90w LED Solar Sensor Street Light - Silver has a built-in motion sensor, so it is the perfect addition to your existing house, factory or farm. Simply attach the street light to a wall, a pole, a fence or even a dead tree, and you're all set to go. The solar charging panel is on the reverse side of this street light fitting, so there are no cables at all required, nor an electrician, saving you a lot of money.

The Skyline 90w LED Solar Sensor Street Light - Silver has the following product features:

• Specifications:
  • Street Light (Bottom Side of Fitting):
    • Construction - ABS Plastic.
    • Wattage - 90w LED.
    • Lumen Output - 9,000LM.
    • LED Colour - 5000K.
    • Beam Angle - 120°.
    • CRI - >80.
    • Dimmable - Yes, from 100% down to 30% via motion sensor.
    • Sensor - Built In Motion Sesnsor.
    • Mounting Pole Included - This has an angled 500mm x 45mmØ Pole that insets into the base of the Street Light.
  • Solar Panel (Rear Side of Fitting):
    • Construction - Polycrystalline.
    • Power - 6v 11.5w.
    • Sensor - Built In Dusk Till Dawn Sensor.
    • Sensor Override - No.
  • Battery:
    • Construction - Lithium.
    • Charging Time - 6-8 Hours.
    • Discharge Time - 10-12 Hours.
    • Power - 24Ah.
    • This is located inside the street light body.
  • Remote Control:
    • Mode 1st Push - Motion Sensor is ON - After Dusk, Light will be on at 100% brightness, then drop down to 30% after 30 seconds if NO motion is detected.
    • Mode 2nd Push - Motion Sensor is OFF - After Dusk, Light will be ON full brightness.
    • 4H and 6H Buttons - This is the Timer Option, so the light will turn OFF after this many hours.
    • ON - The Light will come ON and default in "Mode 1st Push" setting.
    • OFF - The Light will turn OFF.
  • Push Button on the Bottom Side of Street Light:
    • This can also control the street light, without the use of the remote control.
    • Press 1st Time - Motion Sensor is ON - After Dusk, Light will be on at 100% brightness, then drop down to 30% after 30 seconds if NO motion is detected.
    • Press 2nd Time - Motion Sensor is OFF - After Dusk, Light will be ON full brightness
    • Press and Hold - Turns the Street Light OFF.
• Dimensions:
  • Street Light Length - 645mm.
  • Street Light Width - 250mm.
  • Street Light Depth - 65mm.
  • Pole Entry - 50mmØ.
  • Pole Length - Angled 500mm x 45mmØ
  • Pole Saddle Bracket - Can accomodate poles from 45-100mm Ø.
• IP Rating: IP65.
• ASA: Australian Standards Approved.
• Condition: Brand new in manufacturer's packaging.